SCENE 04: Inside the glitch world, glitch is created. Camera shows establishing shot of glitch world with binary etc. Glitch emerges and starts flying towards binary.

SCENE 05: Glitch infects the first string of binary. Binary changes colour to red once infected and the binary stops moving as well.

SCENE 07: Shows binary (infected) becomes blue or green again, but glitch infects another one, which then creates a chain reaction and infects another.

SCENE 09: Glitch has almost infected the whole world. Camera shows glitch world slowly being infected to the max

SCENE 11: Virus scan works and police orbs start flying around shooting the infected binary and returning it to normal until all is clear.

SCENE 13: police orb drives off camera and the camera shows glitch hiding behind binary.


SCENE 15: Glitch world completely infected and glitch flying about with evil laugh etc…


At the end of last term after our persentation (which didnt go at att that bad) the group and i decided to hold a brief meeting in orded to discuss where we stood and where we needed to take the story in the aspect of recreating the storyline and finilised the story.
with the additional help of Rahul, the group has been formed and clear as to what we will be doing for the project.
After talking to our tutors about our progress, we were give many different ideas and different dierctions to go in order to make the story visually pleasing.
the first issue he adderssed was obviously the glitch universe which i am in charge of. his idea was for us not to creat just a normal city but infact to make it more styalised and abstract. another issue he picked out was the character Glitch it self. he insisted that the character should not be a character but left as a normal orb.
ideally the roles have not changed, but i will be getting that additional help from rahul in terms of the animation and some of the dynamics that are going to be used in the universe.
We indeed took on borad the tutors ideas and created a new set of storyboards and blockouts.

these are our new roles.



GLITCH STORY AND SCENES
ALEX SCENES PRINCE SCENES RAHUL SCENES
PRINCE AND RAHUL SCENES


SCENE 01(Alex): Vernon settling into the office, knocks over pen pot, camera zooms into
computer

SCENE 02 (Prince): Through the wires and inside the hard drive, shows motherboard, camera trails into section of mother board and into a room via air vent (following an electron)

SCENE 03 (Rahul): Inside the room. Camera emerges from air vent, follows 2 orbs through the course, then on the 3rd orb, it gets infected and turns red. Camera shows infection and creation of glitch. Camera zooms into infected glitch orb.

SCENE 04 (prince): Inside the glitch world, glitch is created. Camera shows establishing shot of glitch world with binary etc. Glitch emerges and starts flying towards binary.

SCENE 05 (Prince): Glitch infects the first string of binary. Binary changes colour to red once infected and the binary stops moving as well.

SCENE 06 (Alex): Vernon get first error and types in sequence and clears the errors

SCENE 07 (Prince): Shows binary (infected) becomes blue or green again, but glitch infects another one, which then creates a chain reaction and infects another.

SCENE 08 (Alex): Vernon gets second error, types in same sequence but doesn’t work. Gets angry and types franticly.

SCENE 09 (Prince): Glitch has almost infected the whole world. Camera shows glitch world slowly being infected to the max

SCENE 10 (Alex): Vernon runs a virus scan

SCENE 11 (Prince): Virus scan works and police orbs start flying around shooting the infected binary and returning it to normal until all is clear.

SCENE 12 (Alex): Vernon’s error disappears, Vernon is happy and relaxes with a smile.

SCENE 13 (Prince): police orb drives off camera and the camera shows glitch hiding behind binary.

SCENE 14 (Alex): Vernon flips out because the error comes back and says critical error.

SCENE 15 (Prince): Glitch world completely infected and glitch flying about with evil laugh etc…

SCENE 16 (Alex): Vernon going crazy, smashing up office, spills coffee onto key board and causes sparks and computer starts sparking. Computer screen blacks out

SCENE 17 (Prince): Glitch world blacks out

SCENE 18 (All): Computer resets and so does glitch world

SCENE 19 (Alex): Vernon is happy

Although it may seem like Rahul has not got much work to do, he will play an inportant part when it comes to the dynamics and special effects that surround the glitched universe.
after having our presentation at the end of last term, Me Alex and Rahul decided to go through the story once more and finilise it.
we changed mainly the part in the glitch universe. innatially the universe was meant to be a city, as i had no idea how i was going to create this city i continued with research and came across one film that hepled put all my ideas together. the film is one of Keanu Reeves earlier movies named Johnny Mnemonic.
this film helped me to come up with the fact that the city is changed into a universe, gathering ideas from this allowed me to create the city with a rough idea as to how it will look!.

dishearted


For like a week or two i decided to not to do anything on the project because i have had to concentrate on presentations and essays.
Being honest For like a week I had lost main hope in the project because i did not have a complete idea of how the city would look and also with people dropping out of the group, it dis hearted me a little bit so i started a side project that i had always wanted to work on. Also I have a lot of other things going on during these week, financially and emotionally but i have had to keep strong and keep going on. all these problems have taken place in week7 nearing the end of term.
I still kept contact with Alex exchanging ideas for our scenes but still i did not much of a solid idea of the city.

Due to the entrance of a new Member Raul we decided to put together a contract aggreeing his employment to the group!
I know that having a full idea of my city is very hard. to be honest i am pretty stuck in what i am attempting to show full and full.
here are some of my concept designs of my idea for the city.
I feel that with these designs i have come across doing this the wrong way because i have already begun creating the city before i done some concepts.
the following screenshots and images are showing the idea i originally had in my head.

The making of glitch city

Now that i have done most of the modelling for my motherboard i have decided to start modelling the city in the motherboard before i lose the idea i have in my mind.

Glitch concept.












Tasha done some concept work on the Glitch. After alex and i viewed it we both had almost the same ideas of how glitch should look! these are some of tashas designs.
because i will be animating Glitch i will need to know the concept of this character.
these images are taken from Alex's page. they are rough ideas of what glitch should look like! I have left the concept and development of glitch to Alex who will be modelling Glitch it self and creating the concept of Glitch.




I am very much looking forward to seeing Alex's concepts of glitch (lol)
I know im gonna laugh only its because it is alex drawing them. It is personal joke between me and alex.
I feel that working with wit lex is a good challange because we have side projects in which we have been working and developing on from the start of our uni years and this is a huge test to see if we can come together put our ideas forward and create something very eye catching.
so far we are proving to our seives that although we have so much work on our hands, we are proving that we can work together and do this project as good as we can.


















Rendered Shots.














































Now that i hve modeled most of what i need to model for the motherboard, i think it is time to bless you guys with some rendered shots of my models.



These are the chosen designs for bothe my motherboard and my ram. i feel that these textures work well but will need a lot more work done on them.

Mother board textures!







now that i have finished most of my models for the motherboard, I need to create some textures to make the moherboard look like a motherboard.
I came across different coloures for this and decided to choose the normal green look. here are some of the textures i created

Finshed








cable.





























power cable














Making the Ram











Step by step process of how im making the ram!



Rendered shots.

2nd Fan











I will now create the side fan for the pc.
to do this i will use the same step i used to create the propella of the fan. This fan is shaped different, it is more of a square so it would be a lot more easier to create.



Here are some render shots of what i have so far created.

Back on track
















Now with the storyboards out of the way, it time to get back on track with my models.
Once again i have had a change of idea with Glitch City. i will let you my new thoughts after i have posted more of my screenshots.
Now i will show you some more of what i have created for the motherboard.

Followers